Enhance the Output Power of a Shaded Solar Photovoltaic Arrays with Shade Dispersion based TCT Configuration

V Bala Raju, Ch Chengaiah

Abstract


Partial shading has a negative impact on the performance parameters of a Solar Photovoltaic (PV) array, because it shades certain panels while leaving others un-shaded. This article focuses on modeling, comparing and performance assessment of 6×6, 6×5 and 5×6 size shadowed solar PV arrays under different partial shading cases in the MATLAB/ Simulink software. For this purpose, the simulation of series-parallel (SP), Total-Cross-Tied (TCT) and proposed shade dispersion based TCT (SD-TCT) type of array configurations was carried out under few shading cases. The proposed SD-TCT was designed using the shades dispersion technique, which is based on a number logic approach. In this technique, in order to effectively remove the row-current mismatches in the TCT PV array configuration, the shaded and un-shaded modules in an array were re-arranged, so that the shading on modules expands across the whole array. The physical placement of the TCT array modules has been reordered in accordance with the proposed number logic pattern exclusive of altering the electrical links among the panels. The simulation results showed that the performance of the SD-TCT type was superior to that of conventional array configurations.


Keywords


PV Array; Modules; Configurations; Mismatch Losses; Power improvement; Shading Cases

Full Text:

FULL TEXT (PDF)

References


Roy Chowdhury, S., and Saha, H. (2010). Maximum power point tracking of partially shaded solar photovoltaic arrays. Solar Energy Materials and Solar Cells, 94(9), 1441-1447. DOI: 10.1016/j.solmat.2010.04.011

Kaushika, N. D., and Gautam, N. K. (2003). Energy yield simulations of interconnected solar PV arrays. IEEE Transactions on Energy Conversion, 18(1), 127-134. DOI: 10.1109/TEC.2002.805204

Karatepe, E., Boztepe, M., and Çolak, M. (2007). Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells. Solar Energy, 81(8), 977-992. DOI: 10.1016/j.solener.2006.12.001

Hernández, J., Garcia, O., and Jurado, F. (2012). Photovoltaic devices under partial shading conditions. International Review on Modelling and Simulations, 5, 414-425.

Patel, H., and Agarwal, V. (2008). MATLAB-Based Modeling to Study the Effects of Partial Shading on PV Array Characteristics. IEEE Transactions on Energy Conversion, 23(1), 302-310. DOI: 10.1109/TEC.2007.914308

Bidram, A., Davoudi, A., and Balog, R. S. (2012). Control and Circuit Techniques to Mitigate Partial Shading Effects in Photovoltaic Arrays. IEEE Journal of Photovoltaics, 2(4), 532-546. DOI: 10.1109/JPHOTOV.2012.2202879

Vijayalekshmy, S., Rama Iyer, S., and Beevi, B. (2015). Comparative Analysis on the Performance of a Short String of Series-Connected and Parallel-Connected Photovoltaic Array Under Partial Shading. Journal of The Institution of Engineers (India): Series B, 96(3), 217-226. DOI: 10.1007/s40031-014-0143-7

Belhachat, F., and Larbes, C. (2015). Modeling, analysis and comparison of solar photovoltaic array configurations under partial shading conditions. Solar Energy, 120, 399-418. DOI: 10.1016/j.solener.2015.07.039

Wang, Y.-J., and Hsu, P.-C. (2011). An investigation on partial shading of PV modules with different connection configurations of PV cells. Energy, 36(5), 3069-3078. DOI: 10.1016/j.energy.2011.02.052

BALARAJU, V., and Chengaiah, C. (2020). A Comprehensive Study on Re-arrangement of Modules Based TCT Configurations of Partial Shaded PV Array with Shade Dispersion Method. Trends in Renewable Energy, 6, 37-60. DOI: 10.17737/tre.2020.6.1.00111

Rani, B. I., Ilango, G. S., and Nagamani, C. (2013). Enhanced Power Generation From PV Array Under Partial Shading Conditions by Shade Dispersion Using Su Do Ku Configuration. IEEE Transactions on sustainable energy, 4(3), 594-601. DOI: 10.1109/TSTE.2012.2230033

Sahu, H. S., Nayak, S. K., and Mishra, S. (2016). Maximizing the Power Generation of a Partially Shaded PV Array. IEEE Journal of Emerging and Selected Topics in Power Electronics, 4(2), 626-637. DOI: 10.1109/JESTPE.2015.2498282

Raju, V.B., and Chengaiah, Ch. (2019). Performance Analysis of Conventional, Hybrid and Optimal PV Array Configurations of Partially Shaded Modules. International Journal of Engineering and Advanced Technology, 9(1), 3061-3073. DOI: 10.35940/ijeat.A1661.109119

Yadav, A. S., Pachauri, R. K., Chauhan, Y. K., Choudhury, S., and Singh, R. (2017). Performance enhancement of partially shaded PV array using novel shade dispersion effect on magic-square puzzle configuration. Solar Energy, 144, 780-797. DOI: 10.1016/j.solener.2017.01.011

Kaushika, N. D., and Gautam, N. K. (2003). Energy yield simulations of interconnected solar PV arrays. IEEE Transactions on Energy Conversion, 18(1), 127-134. DOI: 10.1109/TEC.2002.805204

Gautam, N. K., and Kaushika, N. D. (2002). Reliability evaluation of solar photovoltaic arrays. Solar Energy, 72(2), 129-141. DOI: 10.1016/S0038-092X(01)00085-8




DOI: http://dx.doi.org/10.17737/tre.2021.7.1.00128

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 V Bala Raju, Ch Chengaiah

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 License.
Copyright @2014-2021 Trends in Renewable Energy (ISSN: 2376-2136, online ISSN: 2376-2144)